Electrical Cabinets

Electroinvent has more than 20 years of experience in the design, production and commissioning of cabinets for Industrial applications both under company and customer documentation.

Over the years, the company has executed projects in the field of:

Automation lines for Food industry; Glass production; Thermal power plants; Brick's production; Rubber production; Warehouses; Control of stages in Theatres and Cultural houses. Electroinvent has experience in executing its projects with PLCs from Siemens, Schneider, Allen Bradley, WAGO, VIPA.

Various Battery Energy Storage Systems based on LFP, Sodium sulfur, Sodium-Metal-Chloride, Super caps, Lead Acid and more.

Highly specialized power electronic and equipment for amusement parks and roller coasters with linear motors acceleration

Grid connected frequency converters for renewable energy application (harvesting energy from solar and wind)

Amusement Parks

Safety chains and automated access control

Industrial Automation

Furniture production automated flow line control

Power Electronic

Complex cabinets assembly including control and power electronic mixture. Highly trained and experienced personal who can work based on customer documentation.

Truck mounted BESS

Very specific customer requests and projects are thoroughly assessed, designed for manufacturability, and executed by highly skilled workers.

High volume Industrial

High volume production flow line can be set up after careful assessment of the takt time and steps based on this.

Containerized BESS

High Ceiling production halls and heavy machinery like forklifts and cranes allow in-house assembly and test of containerized energy storage systems.

Parameter:			DA2:
Motor power			0,5kW 0,75kW 1.1kW
Supply voltage and frequency			200 ÷ 230V 3~ 50/60Hz
Rated output voltage			200 ÷ 230V 3~ 0 ÷ 200Hz (corresponds to the input voltage)
Nominal output current			3.5A 5.0A 6.5A
Maximum output current			10A 10A 15A
Motor control methods			SVPWN (Space Vector Pulse Width Modulation) SIN PWM
Brake resistor			Built in (50Ω / 100W)
Degree of protection			IP 20
Cooling system			No No Fan cooling

Speed control mode
Analog input multifunctional	Voltage range		0 ÷ ±10 V DC
Analog input multifunctional	Input resistance		10KΩ
Speed control range			1 ÷ 5000
Torque limit operation			Set by parameters or via analog input
Command source			External (analog signal) / Internal (parameters)
Speed accuracy (at rated rotation speed)			0,01% or less at load fluctuation 0-100%
			0,01% or less at power fluctuation ±10%
			0,01% or less at ambient temperature fluctuation 0 - 50 °C

Position control mode
Max input pulse frequency			Max 500Kpps (Line driver) / Max 200Kpps (Open collector)
Pulse type			Pulse + Direction (Aphase + Bphase; CCW Pulse + CW Pulse - optional)
Command source			External (pulse train) / Internal (parameters)
Electronic gear			Electronic gear A/B multiple (-199.00 < A/B < 199.00)
Torque limit operation			Set by parameters or via analog input

Torque control mode
Analog input multifunctional		Voltage range	0 ÷ ±10 V DC
		Input resistance	10KΩ
		Time constant	2,2µS
Speed limit operation			Set by parameters or via analog input
Command source			External (analog signal) / Internal (parameters)

Input - output interface and protection
Digital inputs			5 multifunctional programmable. Optoisolated. NPN
Digital outputs			3 transistor „Open collector“ multifunctional programmable,
Digital outputs			3 differential encoder signal output A/B/Z - Line driver
Communication interface			RS 232 / RS 485
Protections			Overcurrent Overvoltage Under voltage Servo Overheat Regeneration error Overload Encoder error IPM fault Communication error and other

Working and storage environment
Operating temperature			0 °C до 50 °C (If operation temperature is above specified range, forced cooling will be required)
Storage temperature			-20 °C ÷ +65 °C
Humidity			80% at 30 °C (non-condensing)