| Parameter: | DA2: | ||||
|---|---|---|---|---|---|
| Motor power | 0,5kW 0,75kW 1.1kW | ||||
| Supply voltage and frequency | |||||
| Rated output voltage | 200 ÷ 230V 3~ 0 ÷ 200Hz (corresponds to the input voltage) | ||||
| Nominal output current | 3.5A 5.0A 6.5A | ||||
| Maximum output current | 10A 10A 15A | ||||
| Motor control methods | SVPWN (Space Vector Pulse Width Modulation) SIN PWM |
||||
| Brake resistor | |||||
| Degree of protection | |||||
| Cooling system | No No Fan cooling |
||||
| Analog input multifunctional | Voltage range | ||||
| Input resistance | |||||
| Speed control range | |||||
| Torque limit operation | Set by parameters or via analog input | ||||
| Command source | External (analog signal) / Internal (parameters) | ||||
| Speed accuracy (at rated rotation speed) | 0,01% or less at load fluctuation 0-100% | ||||
| 0,01% or less at power fluctuation ±10% | |||||
| 0,01% or less at ambient temperature fluctuation 0 - 50 °C | |||||
| Max input pulse frequency | Max 500Kpps (Line driver) / Max 200Kpps (Open collector) | ||||
| Pulse type | Pulse + Direction (Aphase + Bphase; CCW Pulse + CW Pulse - optional) | ||||
| Command source | External (pulse train) / Internal (parameters) | ||||
| Electronic gear | Electronic gear A/B multiple (-199.00 < A/B < 199.00) | ||||
| Torque limit operation | Set by parameters or via analog input | ||||
| Analog input multifunctional | Voltage range | ||||
| Input resistance | |||||
| Time constant | |||||
| Speed limit operation | Set by parameters or via analog input | ||||
| Command source | External (analog signal) / Internal (parameters) | ||||
| |
|||||
| Digital inputs | 5 multifunctional programmable. Optoisolated. NPN | ||||
| Digital outputs | 3 transistor „Open collector“ multifunctional programmable, | ||||
| 3 differential encoder signal output A/B/Z - Line driver | |||||
| Communication interface | |||||
Protections | Overcurrent Overvoltage Under voltage Servo Overheat Regeneration error Overload Encoder error IPM fault Communication error and other | ||||
| Operating temperature | 0 °C до 50 °C (If operation temperature is above specified range, forced cooling will be required) | ||||
| Storage temperature | |||||
| Humidity | 80% at 30 °C (non-condensing) | ||||