AC Servo Drives
ELAS servo drives are designed for AC and DC brushless servo motors with
power range 0.55 kW to 11 kW
Fields of application:
AC servo drives for CNC machines
AC servo drives for Robotics
Multi-operational machines
Position control Printing / Press machines
Food industry
Factory automation
Packing machines
ELAS – DA2
Servo drive with single phase power supply 200 – 230V 1 ~ 50/60Hz and motor power range 0,55 kW to 1,1 kW
| Parameter: | DA2: | ||||
|---|---|---|---|---|---|
| Motor power | 0,5kW 0,75kW 1.1kW | ||||
| Supply voltage and frequency | |||||
| Rated output voltage | 200 ÷ 230V 3~ 0 ÷ 200Hz (corresponds to the input voltage) | ||||
| Nominal output current | 3.5A 5.0A 6.5A | ||||
| Maximum output current | 10A 10A 15A | ||||
| Motor control methods | SVPWN (Space Vector Pulse Width Modulation) SIN PWM |
||||
| Brake resistor | |||||
| Degree of protection | |||||
| Cooling system | No No Fan cooling |
||||
| Analog input multifunctional | Voltage range | ||||
| Input resistance | |||||
| Speed control range | |||||
| Torque limit operation | Set by parameters or via analog input | ||||
| Command source | External (analog signal) / Internal (parameters) | ||||
| Speed accuracy (at rated rotation speed) | 0,01% or less at load fluctuation 0-100% | ||||
| 0,01% or less at power fluctuation ±10% | |||||
| 0,01% or less at ambient temperature fluctuation 0 - 50 °C | |||||
| Max input pulse frequency | Max 500Kpps (Line driver) / Max 200Kpps (Open collector) | ||||
| Pulse type | Pulse + Direction (Aphase + Bphase; CCW Pulse + CW Pulse - optional) | ||||
| Command source | External (pulse train) / Internal (parameters) | ||||
| Electronic gear | Electronic gear A/B multiple (-199.00 < A/B < 199.00) | ||||
| Torque limit operation | Set by parameters or via analog input | ||||
| Analog input multifunctional | Voltage range | ||||
| Input resistance | |||||
| Time constant | |||||
| Speed limit operation | Set by parameters or via analog input | ||||
| Command source | External (analog signal) / Internal (parameters) | ||||
| |
|||||
| Digital inputs | 5 multifunctional programmable. Optoisolated. NPN | ||||
| Digital outputs | 3 transistor „Open collector“ multifunctional programmable, | ||||
| 3 differential encoder signal output A/B/Z - Line driver | |||||
| Communication interface | |||||
Protections | Overcurrent Overvoltage Under voltage Servo Overheat Regeneration error Overload Encoder error IPM fault Communication error and other | ||||
| Operating temperature | 0 °C до 50 °C (If operation temperature is above specified range, forced cooling will be required) | ||||
| Storage temperature | |||||
| Humidity | 80% at 30 °C (non-condensing) | ||||
ELAS – DB2
Servo drive with single phase power supply 200 – 230V 1 ~ 50/60Hz and motor power range 1,5 kW to 2,2 kW
| Parameter: | DB2: | |||
|---|---|---|---|---|
| Motor power | 1,5kW 2,2kW |
|||
| Supply voltage and frequency | ||||
| Rated output voltage | 200 ÷ 230V 3~ 0 ÷ 200Hz (corresponds to the input voltage) | |||
| Nominal output current | 7.5A 10.0A | |||
| Maximum output current | 25A 35A | |||
| Motor control methods | SVPWN (Space Vector Pulse Width Modulation); SIN PWM | |||
| Brake resistor | ||||
| Degree of protection | ||||
| Cooling system | ||||
| Analog input multifunctional | Voltage range | |||
| Input resistance | ||||
| Speed control range | ||||
| Torque limit operation | Set by parameters or via analog input | |||
| Command source | External (analog signal) / Internal (parameters) | |||
| Speed accuracy (at rated rotation speed) | 0,01% or less at load fluctuation 0-100% | |||
| 0,01% or less at power fluctuation ±10% | ||||
| 0,01% or less at ambient temperature fluctuation 0 - 50 °C | ||||
| Max input pulse frequency | Max 500Kpps (Line driver) / Max 200Kpps (Open collector) | |||
| Pulse type | Pulse + Direction; (Aphase + Bphase; CCW Pulse + CW Pulse - optional) | |||
| Command source | External (pulse train) / Internal (parameters) | |||
| Electronic gear | Electronic gear A/B multiple (-199.00 < A/B < 199.00) | |||
| Torque limit operation | Set by parameters or via analog input | |||
| Analog input multifunctional | Voltage range | |||
| Input resistance | ||||
| Time constant | ||||
| Speed limit operation | Set by parameters or via analog input | |||
| Command source | External (analog signal) / Internal (parameters) | |||
| Digital inputs | 5 multifunctional programmable. Optoisolated. NPN | |||
| Digital outputs | 3 transistor „Open collector“ multifunctional programmable | |||
| 3 differential encoder signal output A/B/Z - Line driver | ||||
| Communication interface | ||||
| Protections | Overcurrent Overvoltage Under voltage Servo Overheat Regeneration error Overload Encoder error IPM fault Communication error and other | |||
| Operating temperature | 0 °C to 50 °C (If operation temperature is above specified range, forced cooling will be required) | |||
| Storage temperature | -20 °C ÷ +65 °C | |||
| Humidity | 80% at 30 °C (non-condensing) | |||
ELAS – DC2
Servo drive with single phase power supply 200 – 230V 1 ~ 50/60Hz and motor power range 3,0 kW to 5,5 kW
| Parameter: | DC2: | ||||
|---|---|---|---|---|---|
| Motor power | 3.0kW 4.0kW 5.5kW |
||||
| Supply voltage and frequency | |||||
| Rated output voltage | 200 ÷ 230V 3~ 0 ÷ 200Hz (corresponds to the input voltage) | ||||
| Nominal output current | 15A 20A 25A |
||||
| Maximum output current | 50A 20A 75A |
||||
| Motor control methods | SVPWN (Space Vector Pulse Width Modulation); SIN PWM |
||||
| Brake resistor | |||||
| Degree of protection | |||||
| Cooling system | |||||
| Analog input multifunctional | Voltage range | ||||
| Input resistance | |||||
| Speed control range | |||||
| Torque limit operation | Set by parameters or via analog input | ||||
| Command source | External (analog signal) / Internal (parameters) | ||||
| Speed accuracy (at rated rotation speed) | 0,01% or less at load fluctuation 0-100% | ||||
| 0,01% or less at power fluctuation ±10% | |||||
| 0,01% or less at ambient temperature fluctuation 0 - 50 °C | |||||
| Max input pulse frequency | Max 500Kpps (Line driver) / Max 200Kpps (Open collector) | ||||
| Pulse type | Pulse + Direction; (Aphase + Bphase; CCW Pulse + CW Pulse - optional) | ||||
| Command source | External (pulse train) / Internal (parameters) | ||||
| Electronic gear | Electronic gear A/B multiple (-199.00 < A/B < 199.00) | ||||
| Torque limit operation | Set by parameters or via analog input | ||||
Analog input multifunctional | Voltage range | ||||
| Input resistance | |||||
| Time constant | |||||
| Speed limit operation | Set by parameters or via analog input | ||||
| Command source | External (analog signal) / Internal (parameters) | ||||
| |
|||||
| Digital inputs | 5 multifunctional programmable. Optoisolated. NPN | ||||
| Digital outputs | 3 transistor „Open collector“ multifunctional programmable, | ||||
| 3 differential encoder signal output A/B/Z - Line driver | |||||
| Communication interface | |||||
Protections | Overcurrent Overvoltage Under voltage Servo Overheat Regeneration error Overload Encoder error IPM fault Communication error and other | ||||
| Operating temperature | 0 °C до 50 °C (If operation temperature is above specified range, forced cooling will be required) | ||||
| Storage temperature | -20 °C ÷ +65 °C | ||||
| Humidity | 80% at 30 °C (non-condensing) | ||||
ELAS – DB4
Servo drive with three phase power supply 380 – 400V 3 ~ 50/60Hz and motor power range 3,0 kW
| Parameter: | DB4: | |||
|---|---|---|---|---|
| Motor power | 3.0kW 4.0kW |
|||
| Supply voltage and frequency | ||||
| Rated output voltage | 380 ÷ 400V 3~ 0 ÷ 200Hz (corresponds to the input voltage) | |||
| Nominal output current | 8A 10A | |||
| Maximum output current | 25A 35A | |||
| Motor control methods | SVPWN (Space Vector Pulse Width Modulation); SIN PWM | |||
| Brake resistor | ||||
| Degree of protection | ||||
| Cooling system | ||||
| Analog input multifunctional | Voltage range | |||
| Input resistance | ||||
| Speed control range | ||||
| Torque limit operation | Set by parameters or via analog input | |||
| Command source | External (analog signal) / Internal (parameters) | |||
| Speed accuracy (at rated rotation speed) | 0,01% or less at load fluctuation 0-100% | |||
| 0,01% or less at power fluctuation ±10% | ||||
| 0,01% or less at ambient temperature fluctuation 0 - 50 °C | ||||
| Max input pulse frequency | Max 500Kpps (Line driver) / Max 200Kpps (Open collector) | |||
| Pulse type | Pulse + Direction; (Aphase + Bphase; CCW Pulse + CW Pulse - optional) | |||
| Command source | External (pulse train) / Internal (parameters) | |||
| Electronic gear | Electronic gear A/B multiple (-199.00 < A/B < 199.00) | |||
| Torque limit operation | Set by parameters or via analog input | |||
| Analog input multifunctional | Voltage range | |||
| Input resistance | ||||
| Time constant | ||||
| Speed limit operation | Set by parameters or via analog input | |||
| Command source | External (analog signal) / Internal (parameters) | |||
| Digital inputs | 5 multifunctional programmable. Optoisolated. NPN | |||
| Digital outputs | 3 transistor „Open collector“ multifunctional programmable | |||
| 3 differential encoder signal output A/B/Z - Line driver | ||||
| Communication interface | ||||
Protections | Overcurrent Overvoltage Under voltage Servo Overheat Regeneration error Overload Encoder error IPM fault Communication error and other | |||
| Operating temperature | 0 °C до 50 °C (If operation temperature is above specified range, forced cooling will be required) | |||
| Storage temperature | -20 °C ÷ +65 °C | |||
| Humidity | 80% at 30 °C (non-condensing) | |||
ELAS – DC4
Servo drive with three phase power supply 380 – 400V 3 ~ 50/60Hz and motor power range 5,5 kW to 11,0 kW
| Parameter: | DC4: | ||||
|---|---|---|---|---|---|
| Motor power | 5.5kW 7.5kW 11kW |
||||
| Supply voltage and frequency | |||||
| Rated output voltage | 380 ÷ 400V 3~ 0 ÷ 200Hz (corresponds to the input voltage) | ||||
| Nominal output current | 12A 20A 25A |
||||
| Maximum output current | 50A 50A 75A |
||||
| Motor control methods | SVPWN (Space Vector Pulse Width Modulation) SIN PWM |
||||
| Brake resistor | |||||
| Degree of protection | |||||
| Cooling system | |||||
| Analog input multifunctional | Voltage range | ||||
| Input resistance | |||||
| Speed control range | |||||
| Torque limit operation | Set by parameters or via analog input | ||||
| Command source | External (analog signal) / Internal (parameters) | ||||
| Speed accuracy (at rated rotation speed) | 0,01% or less at load fluctuation 0-100% | ||||
| 0,01% or less at power fluctuation ±10% | |||||
| 0,01% or less at ambient temperature fluctuation 0 - 50 °C | |||||
| Max input pulse frequency | Max 500Kpps (Line driver) / Max 200Kpps (Open collector) | ||||
| Pulse type | Pulse + Direction (Aphase + Bphase; CCW Pulse + CW Pulse - optional) | ||||
| Command source | External (pulse train) / Internal (parameters) | ||||
| Electronic gear | Electronic gear A/B multiple (-199.00 < A/B < 199.00) | ||||
| Torque limit operation | Set by parameters or via analog input | ||||
| Analog input multifunctional | Voltage range | ||||
| Input resistance | |||||
| Time constant | |||||
| Speed limit operation | Set by parameters or via analog input | ||||
| Command source | External (analog signal) / Internal (parameters) | ||||
| |
|||||
| Digital inputs | 5 multifunctional programmable. Optoisolated. NPN | ||||
| Digital outputs | 3 transistor „Open collector“ multifunctional programmable, | ||||
| 3 differential encoder signal output A/B/Z - Line driver | |||||
| Communication interface | |||||
Protections | Overcurrent Overvoltage Under voltage Servo Overheat Regeneration error Overload Encoder error IPM fault Communication error and other | ||||
| Operating temperature | 0 °C до 50 °C (If operation temperature is above specified range, forced cooling will be required) | ||||
| Storage temperature | 20 °C ÷ +65 °C | ||||
| Humidity | 80% at 30 °C (non-condensing) | ||||